Independent Mac repair & data recovery. Not Apple Inc. Apple-certified technicians.Workshop: 80 Willow Walk, SE1 5SYBeckenham drop-off: appointment only
applerepair.co.uk Call the workshop020 8658 4366

Home / Logic board repair

Micro-soldering · Liquid damage

Logic board repair that keeps your data

We repair the board you've got instead of replacing it. It usually costs less, and on newer Macs it's the only way to keep the files that were never backed up.

LOGIC BOARD LINEKeyboardTrackpadBacklightDisplayBatteryUSB-CPower managementSSD controllerYour files(NAND storage)Charging ICApple chip / CPUholds the encryption keysFAULT FOUND HEREPowerBatteryDataDisplayInput

One fault, not a whole new board

Most dead logic boards have a single failed part: a shorted capacitor, a burnt charging chip or a corroded connector. It sits on one line of the board and stops the whole Mac.

Replacing the board fixes that by throwing away everything else too, including the storage on newer Macs. We repair the one part and keep the rest.

How a board repair works

  1. Measure

    Bench power supply and multimeter checks show which power rail is failing.

  2. Locate

    Thermal imaging and the board's schematics narrow it down to a single component.

  3. Replace

    The failed part is removed and replaced under the microscope with hot air and fine-tip soldering.

  4. Test and recover

    The Mac is booted, your data is checked and the machine is stress-tested before collection.

Board faults we fix

  • Liquid damageCleaning, corrosion removal and replacement of damaged components.
  • No power or not chargingShorted capacitors, failed charging chips, USB-C port controllers and power-management faults.
  • No picture or backlightBacklight circuits, display connectors and fuses.
  • Graphics chip failuresKnown faults on 2008 and 2011 MacBook Pro models and some iMacs.
  • Stuck on Apple logoPower-sequencing and firmware faults on T2 and Apple silicon Macs.
  • Failed previous repairsBoards other shops have given up on or quoted to replace.

Questions

Board repair FAQ

What should I do straight after a spill?

Switch the Mac off and unplug it. Don't charge it or try to turn it on to check, and don't use rice or a hair dryer. Bring it in as soon as you can, because corrosion keeps spreading.

Why repair the board instead of replacing it?

Two reasons. A repair usually costs much less than a new board. And on 2018 and later Macs, a new board can't read your old encrypted storage, so repair is the only way to keep your files.

Another shop said my board can't be fixed. Can you look?

Yes. Many boards we repair have already been written off elsewhere. We tell you honestly after diagnosis whether it can be done.

Mac dead and no backup? Call before anyone replaces the board.

Speak to the technician who will work on your Mac. You get a fixed quote before any work starts.

020 8658 4366